custom TV walls
Media walls built around your screen: recessed mount, hidden cabling, backlit stone, floating console and linear fire, detailed as one piece of joinery.
Explore TV wallsTV walls · Wall décor · Ceilings
Built in.
Not bolted on.
Custom TV walls, wall panelling and feature ceilings across Greater Houston. Measured, built and wired by one crew, for one fixed price.
On site
Trowelled by hand,
sealed to last
Lime plaster and microcement go on in two or three thin coats over consecutive days, each trowelled by hand and left to cure before the next. The last coat is burnished, then sealed, so kitchens, hallways and bathrooms wipe clean.
Panelled walls are the opposite: almost everything happens in the shop. Slats are cut, sanded and finished before they reach you, and a typical wall goes up in a day.
See how a project runs
Drag the handle, or focus it and use the arrow keys.
Residential & commercialFree estimatesFully insured
One crew builds the whole wall.
You buy a panel kit online. A handyman battens it to the wall. Someone else drills for the bracket. An electrician turns up after the panelling is already up, so the cable gets surface-trunked down the side and the light strip is stuck on with tape.
Panel-It works differently. One team designs the wall or the ceiling, fabricates it in the shop and fits it. Panelling, mount, cabling, lighting and stone go in as a single piece of joinery, set out to your room rather than to the panel.
What we do
Three trades.
One crew.
A media wall, a panelled hallway or a floating ceiling all start the same way: a scaled drawing, shop-made parts and one crew that owns the job from set-out to the last clip.
wall décor
Slat and fluted panelling, Venetian plaster, stone cladding, backlit mirrors and lit display niches. Any wall in any room, finished to furniture tolerance.
Explore wall décor
feature ceilings
Floating rafts, stepped drops and cove lighting that washes the room in warm, dimmable light. Beams, slat ceilings and kitchen ceilings too.
Explore ceilingsThe detail
Measured twice.
Cut once.
Most installs fail in the details: a slat that doesn't land on centre, a light strip you can see the diodes in, a cable loop behind the console.
We set out every wall and ceiling to the room, not to the panel, so spacing stays even into both corners and the TV lands dead centre on the feature. Power, HDMI, soundbar and network are chased in behind the substrate and terminated in a serviceable back box.
Panels and carcasses are cut and pre-finished off site, so the messy half of the job never enters your house. Floors are sheeted, cuts are made outside, and the room is handed back clean the day we finish.
See how it works
Why clients choose us
Why people
call us back
One crew, start to finish.
No handoff between a carpenter, an electrician and an AV installer. The people who draw your wall are the people who fit it, so nothing gets lost between trades.
A fixed price before we start.
You get a scaled elevation, a render of your actual room and a written price covering materials, lighting and the install. No day rates, no "while we're here" extras.
Nothing on show.
Power, HDMI, soundbar and network are chased in behind the substrate and terminated in a back box you can still get to. No trunking, no loops, no visible fixings.
Furniture-grade finish.
Shop-fabricated and pre-finished, scribed to the ceiling and mitred at the returns. We build to joinery tolerance, not to site tolerance.
View our work
Recent walls
and ceilings
Living rooms, bedrooms, hallways, kitchens and receptions. Slat, stone, plaster and light, finished to the same standard in every room.
Our process
First call to
finished room
Four steps, a fixed price and typically two to four days on site. You know what you are getting before anything is cut.
Free estimate
We visit, measure, listen to what the room is for, and give you a fixed written price. No charge, no pressure.
Design sign-off
You get a scaled elevation and a render of your room with materials, lighting and TV position marked. We adjust until it's right.
Shop fabrication
Panels, carcasses and stone are cut and pre-finished off site, so the messy half of the job never enters your house.
Install & handover
Two to four days on site. We fit, wire, test the lighting and TV, clean up and walk you through it.
Materials
Finishes we keep on the shelf
Real veneer, acoustic felt backing, lime plaster and large-format porcelain. If you have a finish in mind that isn't here, we'll source and sample it.
Natural oakSlat · acoustic backed
American walnutSlat · fluted
Charcoal ashSlat · matt lacquer
Porcelain marbleLarge format · 6mm
Venetian plasterLime · microcement
Split-face stoneTravertine · stacked
Clients
What our clients say
“They took a blank wall in the lounge and turned it into the reason people come over. The lighting detail alone was worth it.”
Placeholder review · Living room“Three quotes, and Panel-It were the only ones who turned up with a drawing. Finished a day early and left the place spotless.”
Placeholder review · Media room“We used them for the reception wall and then again at home. Not a single visible cable in either job.”
Placeholder review · Commercial“The ceiling raft changed the whole room. Evenings now run on the cove light alone and the lamps stay off.”
Placeholder review · Living room ceiling“They handled the TV, the soundbar and the fire as one job. No chasing three different trades around.”
Placeholder review · Family room“Quiet, tidy and quick. Four days and the bedroom looks like a different room.”
Placeholder review · BedroomService area
Serving
Greater Houston
Residential and commercial work across Greater Houston, including the areas below. If you're just outside, ask. We travel for the right job.
- River Oaks
- Memorial
- The Heights
- Bellaire
- West University
- Katy
- Sugar Land
- The Woodlands
- Cypress
- Pearland
Free estimate
Ready to talk
about your room?
A photo and a rough width is enough to start. Residential and commercial, and there is no charge for the visit or the drawing.